New C-CAM diaphragms for all speakers

C-CAM (Ceramic-Coated Aluminium/Magnesium) has been used in virtually all Monitor Audio loudspeakers for 40 years, forming the basis for the precise, dynamic, and crisp sound of every speaker.
For the Bronze 7G series, the aluminum/magnesium blend has been re-developed to further optimize stiffness and resonance behavior, resulting in an even clearer, more precise sound and higher power handling. Additionally, the diaphragms are now darkly colored, which not only gives them a more elegant look but also makes them less susceptible to disturbing light reflections, especially in home cinema use (without grilles).

Larger voice coils and stronger magnets in woofers and mid-woofers

The stiffer diaphragms allow for higher power handling and thus more output from each individual speaker. For this to work, the drive of each individual driver also had to be revised. Thus, the voice coils in the Bronze 7G series have been enlarged from 25 millimeters in diameter to 28.5 millimeters compared to the Bronze 6G series, resulting in significantly more precision and accuracy, as well as stronger magnets that enable faster and better acceleration of the diaphragm.
So: More output (up to six! decibels more peak output compared to the Bronze 6G series) AND more precision, combined with higher efficiency, which makes the speakers even easier to drive, meaning they can show their full potential even with "smaller" amplifiers.

New C-CAM Gold Tweeter with UD Waveguide II

The tweeter in the Bronze 7G series has also been completely redesigned and is now thinner and lighter than ever, leading to even higher dynamics combined with better efficiency.
In addition, the tweeter is framed by the UD (Uniform Dispersion) Waveguide II, already known from the Silver 7G series, which also increases efficiency (meaning less distortion), enables a lower crossover frequency to the midrange or mid-woofer (which in turn means a significantly more harmonious transition between the individual drivers), and ensures a wider dispersion characteristic of the tweeter.
In addition to the also optimized aluminum grille with hexagonal openings, integrated directly into the waveguide, there are two more exciting, "invisible" improvements. On the one hand, a compression ring is integrated into the tweeter, which also increases sound pressure, and the ventilation of the tweeter has been optimized, allowing it to play at a higher level in the all-important range between two and three kilohertz without generating unwanted distortion.
So the tweeter has not just been optimized, but completely redeveloped.

Completely re-developed crossover - So everything is in order

Due to the numerous innovations and changes in the Bronze 7G series, it became necessary to re-tune the crossovers from scratch. Here too, the opportunity was taken to completely redesign them and re-select components - with a strict focus on the highest signal purity and high power handling, as well as maintaining an impedance that never drops below the critical four ohms.

Specifications:

Enclosure Concept: 2-way

Frequency Response in Room (-6 dB): 55 Hz - 30 kHz

Nominal Impedance: 8 Ohm

Minimum Impedance (20 Hz to 20 kHz): >4 Ohm

Max. SPL (AES75, Z-weighted): 119 dB

Continuous Power Handling (determined according to CTA 426-B): 60 - 240 Watts at 4 Ohms; 30 - 120 Watts at 8 Ohms

Recommended Amplifier Power (RMS, Music Signal): 60 - 240 Watts

Bass Principle: Sealed

Bass Reflex Tuning Frequency: N/A

Crossover Frequency: LF/HF: LF/HF: 2.7 kHz

Driver Complement: 1 x 1" (25 mm) C-CAM Gold Tweeter with UD Waveguide
2 x 6" (152 mm) C-CAM Bass/Mid Driver

Cabinet Dimensions incl. Full Accessories (H x W x D): 205 x 500 x 228 mm
(8 [1/16] x 19 [11/16] x 9")

Weight (Product, piece): 8.1 kg

Available as: Piece

Pannes Vertriebs KG
Berliner Straße 3, 23795 Bad Segeberg, Germany
info@pannes-vertrieb.de
http://www.pannes-vertrieb.de