Description
The DT-3600 Power Conditioner is designed for powering high-end and Hi-Fi equipment. The main elements of the device are two balanced toroidal transformers 230 VAC/115 + 115 VAC, designed and developed by Audes, which isolate the device from the domestic network.
The two transformers are referred to as the main transformer and group 2 transformer and have a nominal power of 3300 VA and 300 VA respectively. Such a design allows connecting low-power devices and devices with a switched-mode power supply (SMPS) to the separate group 2 transformer. SMPS can cause distortions that can negatively affect analog devices if connected to the same power source. Devices connected to group 1 sockets are isolated from devices connected to group 2 sockets.
The DT-3600's sockets are completely isolated from the mains. The output voltages are symmetrical to the artificial center tap, which is connected to the earth contacts of each socket. The toroidal transformers inside the device have been designed to filter interference from the mains through controlled stray inductance and capacitance. The transformers have a very low output impedance, allowing the device to easily deliver large current surges up to the maximum power in each socket while maintaining the nominal voltage.
When the Power Conditioner is switched on, the transformers are subjected to a high inrush current during the magnetization of the transformer core. Therefore, a soft start is implemented in the Power Conditioner. The model has a special resistor to limit the inrush current, so that other electrical devices connected to the same power grid remain unaffected.
Despite the considerable nominal power of such transformers, the design of the Power Conditioner minimizes harmful electromagnetic radiation. Nevertheless, do not place the Power Conditioner near turntables and phono preamplifiers.
The model has an integrated DC Blocker. The DC Blocker protects the Power Conditioner from harmful effects of DC current present in the mains. This significantly reduces transformer hum due to a DC offset in the mains. If the mains to which the Power Conditioner is connected does not have DC current, no DC Blocker is required. In the manufacturer's default state, the DT-3600's DC Blocker is switched off, but the user can decide to switch it on. To switch on the DC Blocker, use the corresponding button on the rear panel. The same button is also used to switch off the DC Blocker.
Properties
Total Rated Power - 3600 VA
Rated Power Group 1 - 3300 VA
Rated Power Group 2 - 300 VA
Maximum Current – Group 1 - 16 A
Maximum Current – Group 2 - 1.5 A
Inlet - 16 A IEC C20
Output – Group 1 - 8 × 16 A/250 VAC Socket CEE 7/3
Output – Group 2 - 4 × 16 A/250 VAC Socket CEE 7/3
Power Cord 16 A/250 VAC Plug IEC C19
Dimensions (mm) W477×H266×D520
Weight (Kg) - 61
Manufacturer information
DT-3600 DC
Power conditioner with two isolation transformers, a smaller one for source devices and one for amplifiers, with an integrated DC blocker
AVAILABILITY
Immediately available: Available in our warehouse
Available: Available in our supplier's warehouse*
* We ship either from our warehouse or from our supplier's warehouse, whereby the goods can be sent either to us as an intermediate storage or directly to the customer. Our supplier is the manufacturer or distributor of the goods.
DELIVERY TIME
Shipping takes place within the delivery time stated in the online shop.
DELIVERY PERIODS
Prepayment: The delivery period begins one day after receipt of payment
All other payment methods: The delivery period begins one day after conclusion of the contract
DELIVERY DELAYS
Delivery delays may originate from our suppliers and will be announced by us. If major delivery delays occur, we offer a partial delivery, a replacement, or a refund upon individual arrangement.
Check shipping costs
GERMANY & AUSTRIA
Free shipping on orders over €99
Below that: €4.99 shipping costs
Excluded from this are our TVs, which are shipped with a freight forwarding flat rate of €39. The order value is irrelevant.
EUROPE
€49.99 shipping costs
List of countries:
Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden
OUTSIDE EUROPE
Shipping outside Europe requires individual and personal agreement with our logistics team.
Pickup available
Simply pick up your order at the store
Extended Warranty
More protection thanks to an extended warranty
Cheaper elsewhere?
Ask us for a discount
Description
The DT-3600 Power Conditioner is designed for powering high-end and Hi-Fi equipment. The main elements of the device are two balanced toroidal transformers 230 VAC/115 + 115 VAC, designed and developed by Audes, which isolate the device from the domestic network.
The two transformers are referred to as the main transformer and group 2 transformer and have a nominal power of 3300 VA and 300 VA respectively. Such a design allows connecting low-power devices and devices with a switched-mode power supply (SMPS) to the separate group 2 transformer. SMPS can cause distortions that can negatively affect analog devices if connected to the same power source. Devices connected to group 1 sockets are isolated from devices connected to group 2 sockets.
The DT-3600's sockets are completely isolated from the mains. The output voltages are symmetrical to the artificial center tap, which is connected to the earth contacts of each socket. The toroidal transformers inside the device have been designed to filter interference from the mains through controlled stray inductance and capacitance. The transformers have a very low output impedance, allowing the device to easily deliver large current surges up to the maximum power in each socket while maintaining the nominal voltage.
When the Power Conditioner is switched on, the transformers are subjected to a high inrush current during the magnetization of the transformer core. Therefore, a soft start is implemented in the Power Conditioner. The model has a special resistor to limit the inrush current, so that other electrical devices connected to the same power grid remain unaffected.
Despite the considerable nominal power of such transformers, the design of the Power Conditioner minimizes harmful electromagnetic radiation. Nevertheless, do not place the Power Conditioner near turntables and phono preamplifiers.
The model has an integrated DC Blocker. The DC Blocker protects the Power Conditioner from harmful effects of DC current present in the mains. This significantly reduces transformer hum due to a DC offset in the mains. If the mains to which the Power Conditioner is connected does not have DC current, no DC Blocker is required. In the manufacturer's default state, the DT-3600's DC Blocker is switched off, but the user can decide to switch it on. To switch on the DC Blocker, use the corresponding button on the rear panel. The same button is also used to switch off the DC Blocker.
Properties
Total Rated Power - 3600 VA
Rated Power Group 1 - 3300 VA
Rated Power Group 2 - 300 VA
Maximum Current – Group 1 - 16 A
Maximum Current – Group 2 - 1.5 A
Inlet - 16 A IEC C20
Output – Group 1 - 8 × 16 A/250 VAC Socket CEE 7/3
Output – Group 2 - 4 × 16 A/250 VAC Socket CEE 7/3
Power Cord 16 A/250 VAC Plug IEC C19
Dimensions (mm) W477×H266×D520
Weight (Kg) - 61
Manufacturer information
DT-3600 DC
-
Fidelity Guide
Feel free to check out our Advice Blog. Here we discuss fundamentals and answer frequently asked questions from the Hi-Fi world.
-
FAQs
You can find questions and answers about products, availability, shipping, payment, and service in our FAQs.
-
Customer service
Our online customer service and sales team is available to assist you by phone or email.
shop@fidelity-hh.de
040 25776690 -
Fidelity Store
For personal and expert advice, visit our store. Here you can experience and compare products in 10 different listening studios across more than 800 m² of exhibition space.
Adlerstraße 79, Rellingen
Our exhibition
Arrange an appointment
Frequently asked questions about our products
Please visit our FAQ page to learn more.
Are all displayed products immediately available?
All visible products are generally either in stock with us or can be ordered from our suppliers. You can find the current availability or delivery time on the respective product page. If you have any questions about availability, please feel free to contact us at any time.
Do you offer pre-purchase advice?
Yes. If you are still unsure about your choice or if our online shop does not cover all the information you need, we would be happy to advise you in person. We are committed to finding a long-term and suitable solution for your requirements. Please contact us in person to benefit from our experience.
How do I find the right accessories for my setup?
The added value that the right accessories can bring is often underestimated. To help you get the most out of your setup, we are happy to advise you personally.
Is there a warranty on all products?
Our products come with their own manufacturer's warranty, the duration and terms of which may vary depending on the brand and product. We handle warranty claims for products purchased from us on your behalf.