New C-CAM diaphragms for all speakers

C-CAM (Ceramic-Coated Aluminium/Magnesium) has been used in virtually all Monitor Audio speakers for 40 years, forming the basis for the precise, dynamic and crisp sound of every speaker.
For the Bronze 7G series, the aluminium/magnesium blend has been re-engineered to further optimize strength and resonance behavior, resulting in an even clearer, more precise sound and higher power handling. In addition, the diaphragms are now dark-colored, which not only gives them a more elegant look but also makes them more resistant to disturbing light reflections, especially in home theater use (without covers).

Larger voice coils and stronger magnets in woofers and mid/woofers

The stronger diaphragms allow for higher power handling and thus more output from each individual speaker. To achieve this, the drive of each individual driver also had to be revised. Thus, the voice coils in the Bronze 7G series have been enlarged from 25 millimeters in diameter to 28.5 millimeters compared to the Bronze 6G series, which results in significantly more precision and accuracy, as well as stronger magnets that allow for faster and better acceleration of the diaphragm.
So: more output (up to six! decibels more peak output compared to the Bronze 6G series) AND more precision, combined with higher efficiency, which makes the speakers even easier to drive, meaning they can show their full potential even with "smaller" amplifiers.

New C-CAM Gold Tweeter with UD Waveguide II

The tweeter in the Bronze 7G series has also been completely redesigned and is now thinner and lighter than ever before, resulting in even higher dynamics combined with better efficiency.
In addition, the tweeter is surrounded by the UD (Uniform Dispersion) Waveguide II, already known from the Silver 7G series, which also increases efficiency (which means less distortion), allows a lower crossover frequency to the midrange or mid/woofer (which in turn means a significantly more harmonious transition between the individual drivers) and provides a wider dispersion characteristic of the tweeter.
In addition to the also optimized aluminum grille with hexagonal openings, which is directly integrated into the waveguide, there are two other exciting, "invisible" improvements. Firstly, a compression ring is integrated into the tweeter, which also increases sound pressure, and secondly, the ventilation of the tweeter has been optimized, allowing it to play at a higher level in the crucial range between two and three kilohertz without creating unwanted distortion.
So, the tweeter was not merely optimized, but completely re-developed from scratch.

Completely re-developed crossover - To keep everything in order

Due to the numerous innovations and changes in the Bronze 7G series, it became necessary to re-tune the crossovers from scratch. Here, too, the opportunity was taken to completely redesign them and re-select components - with a strict focus on the highest signal purity and high power handling, as well as maintaining an impedance that never falls below the critical four ohms at any point.

Technical Data:

Enclosure type: 2.5-way

Frequency response in room (-6 dB): 27 Hz - 30 kHz

Nominal impedance: 8 Ohm

Minimum impedance (20 Hz to 20 kHz): >4 Ohm

Max. SPL (AES75, Z-weighted): 118 dB

Continuous power handling (CTA 426-B compliant): 75 - 300 Watts into 4 Ohms; 40 -150 Watts into 8 Ohms

Recommended amplifier power (RMS, music signal): 75 - 300 Watts

Bass principle: Bass reflex - HiVe II

Bass reflex tuning frequency: 38 Hz

Crossover frequency: LF/MF: 470 Hz; MF/HF: 2.6 kHz

Driver complement: 1 x 1" (25 mm) C-CAM Gold tweeter with UD-Waveguide; 1 x 6" (152 mm) C-CAM bass/midrange driver; 1 x 6" (152 mm) C-CAM bass driver

Cabinet dimensions incl. full accessories (H x W x D): 1005 x 269 x 392 mm
(39 [9/16] x 10 [5/8] x 15 [7/16] ")

Weight (product, each): 15.6 kg

Available as: Pair

Pannes Vertriebs KG
Berliner Straße 3, 23795 Bad Segeberg, DE
info@pannes-vertrieb.de
http://www.pannes-vertrieb.de