New C-CAM diaphragms for all loudspeakers

C-CAM (Ceramic-Coated Aluminium/Magnesium) has been used in practically all Monitor Audio loudspeakers for 40 years and forms the basis for the precise, dynamic, and crisp sound of every loudspeaker.
For the Bronze 7G series, the aluminum/magnesium blend has been redeveloped to further optimize strength and resonance behavior, resulting in even clearer, more precise sound and higher power handling. In addition, the diaphragms are now dark-colored, which not only gives them a more elegant look but also makes them even less susceptible to distracting light reflections, especially in home theater use (without covers).

Larger voice coils and stronger magnets in woofers and mid-woofers

The stronger diaphragms allow for higher power handling and thus more output from each individual loudspeaker. For this to work, the drive of each individual driver also had to be revised. And so, the voice coils in the Bronze 7G series have been enlarged from 25 millimeters in diameter to 28.5 millimeters compared to the Bronze 6G series, which results in significantly more precision and accuracy, as well as stronger magnets that enable faster and better acceleration of the diaphragm.
So: more output (up to six! decibels more peak output compared to the Bronze 6G series) AND more precision, combined with higher efficiency, which makes the loudspeakers even easier to drive, meaning they show their full potential even with "smaller" amplifiers.

New C-CAM Gold Tweeter with UD Waveguide II

The tweeter in the Bronze 7G series has also been completely redesigned and is now thinner and lighter than ever before, resulting in even higher dynamics combined with better efficiency.
In addition, the tweeter is enclosed by the UD (Uniform Dispersion) Waveguide II, already known from the Silver 7G series, which also increases efficiency (meaning less distortion), enables a lower crossover frequency to the midrange or mid-woofer (which in turn means a significantly more harmonious transition between the individual drivers) and ensures a wider dispersion characteristic of the tweeter.
In addition to the also optimized aluminum grille with hexagonal openings, which is integrated directly into the waveguide, there are two more exciting, "invisible" improvements. On the one hand, a compression ring is integrated into the tweeter, which also increases sound pressure, and furthermore, the ventilation of the tweeter has been optimized, allowing it to play at a higher level in the all-important range between two and three kilohertz without creating unwanted distortions.
The tweeter has thus not just been optimized, but completely redeveloped.

Completely redesigned crossover - To keep everything in order

Due to the numerous innovations and changes in the Bronze 7G series, it became necessary to retune the crossovers from scratch. Here, too, the opportunity was taken to completely redesign them and re-select components - with a strict focus on the highest signal purity and high power handling, as well as an impedance that at no point drops below the critical four ohms.

Specifications:

Enclosure type: 2-way

Frequency Response in-room (-6 dB): 35 Hz - 30 kHz

Nominal Impedance: 8 Ohms

Minimum Impedance (20 Hz to 20 kHz): 4 Ohms

Maximum SPL (AES75, Z-weighted): 112 dB

Power Handling (RMS into 4 Ohms, calculated IEC 60268-5): 50 - 200 Watts into 4 Ohms; 30 - 100 Watts into 8 Ohms

Recommended Amplifier Requirements (RMS, music signal): 50 - 200 Watts

Bass Alignment: Bass Reflex - HiVe II

Bass Reflex Tuning Frequency: 47 Hz

Crossover Frequency: LF/HF: 3.0 kHz

Drive Unit Complement: 1 x 1" (25 mm) C-CAM Gold Dome tweeter with UD Waveguide
1 x 6" (152 mm) C-CAM bass/
mid-range driver

External Dimensions (H x W x D) Inc. grille and terminals: 335 x 185 x 328 mm
(13 [3/16] x 7[5/16] x 12[15/16] ")

Weight (each): 6.4 kg

Sold As: Pair

Pannes Vertriebs KG
Berliner Straße 3, 23795 Bad Segeberg, DE
info@pannes-vertrieb.de
http://www.pannes-vertrieb.de