


Description
Digital integrated amplifier with Chromecast and Bluetooth
HybridDigitalTM – Class D Amplifier
The D 3045 uses the innovative HybridDigitalTM technology. This is a self-oscillating Class D amplifier that operates with active negative feedback. It first converts the analog curved input signal into a square wave signal via pulse width modulation (PWM). The music information is now exclusively contained in the changing pulse width. Since the power transistors thus only require two switching states – on or off – Hybrid DigitalTM Class D amplifiers operate extremely efficiently and achieve a power output of more than 90% compared to Class A and B technology.
Music streaming via Chromecast and Bluetooth
The C 338 has an integrated Chromecast module, which allows you to wirelessly transfer audio data from your mobile phone, tablet or computer to your stereo system. The Spotify® app also allows you to stream the millions of music titles available there directly to your C 338. And the Bluetooth® receiver built into the amplifier alternatively receives your music files via short-range radio.
Main features
2 x 50 W continuous power into 4 and 8 Ω
2 x 90 / 2 x 150 / 2 x 200 W impulse power into 8 / 4 / 2 Ω
extremely low-distortion HybridDigitalTM amplifier technology
D/A converter with 192 kHz / 24 bit resolution
UPnP streaming via WLAN
integrated Bluetooth® module
integrated Chromecast module
2 optical and 2 coaxial digital inputs
2 analog high-level inputs
Phono MM input
Subwoofer output
Headphone jack
2 WLAN antenna connections
Standby power consumption: 0.5 W
Properties
Preamplifier
Line Input, Subwoofer Output
THD (20 Hz – 20 kHz): <0.005 % at 2 V output
Signal-to-Noise Ratio: 106 dB (IHF; A-weighted, 500 mV output, Unity Gain)
Input Impedance (R and C): 56 kOhm + 100 pF
Maximum Input Level: 4.5 V rms (0.1% THD)
Output Impedance: Source Z + 200 Ohm
Input Sensitivity: 50 mV (100 Hz, 500 mV output, volume at maximum)
Maximum Output Level – IHF Load: 4.5 V (0.1% THD)
Line Input, Headphone Output
THD (20 Hz – 20 kHz): <0.005 % at 1 V output
Signal-to-Noise Ratio: 105 dB (IHF; A-weighted, 32 Ohm, 2 V output, Unity Gain)
Frequency Response: ±0.3 dB (20 Hz – 20 kHz)
Channel Separation: 56 dB at 1 kHz
-
Output Impedance: 0.5 Ohm
General
Line Input, Speaker Output
Continuous Output Power into 4 and 8 Ohms (Stereo): 2 x >50 W (at rated THD, 20 Hz – 20 kHz, both channels driven)
IHF Dynamic Power: 2 x 80 W into 8 Ohms
2 x 150 W into 4 Ohms
2 x 210 W into 2 OhmsTHD (20 Hz – 20 kHz): <0.03 % (250 mW to 50 W, 8 and 4 Ohms)
Signal-to-Noise Ratio: 98 dB (A-weighted, 500 mV input, 1 W output into 8 Ohms)
Clipping Power: 60 W (at 1 kHz and 0.1% THD)
Maximum Output Current: 18 A (into 1 Ohm, 1 ms)
Damping Factor: 300 (8 Ohms, 20 Hz to 6.5 kHz)
Frequency Response: ±0.3 dB (20 Hz – 20 kHz)
Channel Separation: 1 kHz > 75 dB
10 kHz > 65 dBInput Sensitivity (for 50 W into 8 Ohms): Line Level: 380 mV, Digital Input: 18 % FS
Resolution: Up to 24 Bit/192 kHz
Phono Input, Speaker Output
THD (20 Hz – 20 kHz, Stereo): <0.3 % at 50 W output
Signal-to-Noise Ratio: 82 dB (200 Ohm source, A-weighted, 500 mV output)
76 dB (MM cartridge, IHF A-weighted, 500 mV output)Input Sensitivity: 4.1 mV (50 W, 1 kHz at 4 Ohm output, volume at maximum)
Frequency Response: ±0.3 dB (20 Hz – 20 kHz)
Input Impedance: 47 kOhm + 100 pF
Maximum Input Level: 80 mV rms (0.1% THD)
Power Consumption
- in ECO Standby Mode: 0.4 Watt*
- in Control Standby Mode: 1.8 Watt**
- switched off: 0 Watt
* After 20 minutes of no operation and no input signal
** With wireless Bluetooth connection and 20 minutes of no operation and no input signal
NOTE: The Bluetooth connection can be switched on or off by pressing and holding the PLAY button on the AMP 3 remote control
Dimensions and Weight
- Dimensions (W x H x D):435 x 70 x 285 mm
- Weight: 4.85 kg
Downloads
Manufacturer information
C338
The C 338 presents your favorite music with fantastic sound quality and is an incredibly versatile hub for any stereo system. Via Wi-Fi using the integrated Chromecast® module or Bluetooth®, you can play music wirelessly directly from any streaming app stored on your smartphone or tablet. In addition, numerous digital and analog inputs are available to connect, for example, a turntable, a CD player, a TV, or a music server. NAD's innovative HybridDigitalTM amplifier technology ensures a room-filling, dynamic, and detailed Hi-Fi sound in every case. The most important functions and settings can also be controlled via the intuitive user interface of the NAD Remote App, available for iOS and Android.
AVAILABILITY
Immediately available: Available in our warehouse
Available: Available in our supplier's warehouse*
* We ship either from our warehouse or from our supplier's warehouse, whereby the goods can be sent either to us as an intermediate storage or directly to the customer. Our supplier is the manufacturer or distributor of the goods.
DELIVERY TIME
Shipping takes place within the delivery time stated in the online shop.
DELIVERY PERIODS
Prepayment: The delivery period begins one day after receipt of payment
All other payment methods: The delivery period begins one day after conclusion of the contract
DELIVERY DELAYS
Delivery delays may originate from our suppliers and will be announced by us. If major delivery delays occur, we offer a partial delivery, a replacement, or a refund upon individual arrangement.
Check shipping costs
GERMANY & AUSTRIA
Free shipping on orders over €99
Below that: €4.99 shipping costs
Excluded from this are our TVs, which are shipped with a freight forwarding flat rate of €39. The order value is irrelevant.
EUROPE
€49.99 shipping costs
List of countries:
Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden
OUTSIDE EUROPE
Shipping outside Europe requires individual and personal agreement with our logistics team.
Pickup available
Simply pick up your order at the store
Extended Warranty
More protection thanks to an extended warranty
Cheaper elsewhere?
Ask us for a discount
Description
Digital integrated amplifier with Chromecast and Bluetooth
HybridDigitalTM – Class D Amplifier
The D 3045 uses the innovative HybridDigitalTM technology. This is a self-oscillating Class D amplifier that operates with active negative feedback. It first converts the analog curved input signal into a square wave signal via pulse width modulation (PWM). The music information is now exclusively contained in the changing pulse width. Since the power transistors thus only require two switching states – on or off – Hybrid DigitalTM Class D amplifiers operate extremely efficiently and achieve a power output of more than 90% compared to Class A and B technology.
Music streaming via Chromecast and Bluetooth
The C 338 has an integrated Chromecast module, which allows you to wirelessly transfer audio data from your mobile phone, tablet or computer to your stereo system. The Spotify® app also allows you to stream the millions of music titles available there directly to your C 338. And the Bluetooth® receiver built into the amplifier alternatively receives your music files via short-range radio.
Main features
2 x 50 W continuous power into 4 and 8 Ω
2 x 90 / 2 x 150 / 2 x 200 W impulse power into 8 / 4 / 2 Ω
extremely low-distortion HybridDigitalTM amplifier technology
D/A converter with 192 kHz / 24 bit resolution
UPnP streaming via WLAN
integrated Bluetooth® module
integrated Chromecast module
2 optical and 2 coaxial digital inputs
2 analog high-level inputs
Phono MM input
Subwoofer output
Headphone jack
2 WLAN antenna connections
Standby power consumption: 0.5 W
Properties
Preamplifier
Line Input, Subwoofer Output
THD (20 Hz – 20 kHz): <0.005 % at 2 V output
Signal-to-Noise Ratio: 106 dB (IHF; A-weighted, 500 mV output, Unity Gain)
Input Impedance (R and C): 56 kOhm + 100 pF
Maximum Input Level: 4.5 V rms (0.1% THD)
Output Impedance: Source Z + 200 Ohm
Input Sensitivity: 50 mV (100 Hz, 500 mV output, volume at maximum)
Maximum Output Level – IHF Load: 4.5 V (0.1% THD)
Line Input, Headphone Output
THD (20 Hz – 20 kHz): <0.005 % at 1 V output
Signal-to-Noise Ratio: 105 dB (IHF; A-weighted, 32 Ohm, 2 V output, Unity Gain)
Frequency Response: ±0.3 dB (20 Hz – 20 kHz)
Channel Separation: 56 dB at 1 kHz
-
Output Impedance: 0.5 Ohm
General
Line Input, Speaker Output
Continuous Output Power into 4 and 8 Ohms (Stereo): 2 x >50 W (at rated THD, 20 Hz – 20 kHz, both channels driven)
IHF Dynamic Power: 2 x 80 W into 8 Ohms
2 x 150 W into 4 Ohms
2 x 210 W into 2 OhmsTHD (20 Hz – 20 kHz): <0.03 % (250 mW to 50 W, 8 and 4 Ohms)
Signal-to-Noise Ratio: 98 dB (A-weighted, 500 mV input, 1 W output into 8 Ohms)
Clipping Power: 60 W (at 1 kHz and 0.1% THD)
Maximum Output Current: 18 A (into 1 Ohm, 1 ms)
Damping Factor: 300 (8 Ohms, 20 Hz to 6.5 kHz)
Frequency Response: ±0.3 dB (20 Hz – 20 kHz)
Channel Separation: 1 kHz > 75 dB
10 kHz > 65 dBInput Sensitivity (for 50 W into 8 Ohms): Line Level: 380 mV, Digital Input: 18 % FS
Resolution: Up to 24 Bit/192 kHz
Phono Input, Speaker Output
THD (20 Hz – 20 kHz, Stereo): <0.3 % at 50 W output
Signal-to-Noise Ratio: 82 dB (200 Ohm source, A-weighted, 500 mV output)
76 dB (MM cartridge, IHF A-weighted, 500 mV output)Input Sensitivity: 4.1 mV (50 W, 1 kHz at 4 Ohm output, volume at maximum)
Frequency Response: ±0.3 dB (20 Hz – 20 kHz)
Input Impedance: 47 kOhm + 100 pF
Maximum Input Level: 80 mV rms (0.1% THD)
Power Consumption
- in ECO Standby Mode: 0.4 Watt*
- in Control Standby Mode: 1.8 Watt**
- switched off: 0 Watt
* After 20 minutes of no operation and no input signal
** With wireless Bluetooth connection and 20 minutes of no operation and no input signal
NOTE: The Bluetooth connection can be switched on or off by pressing and holding the PLAY button on the AMP 3 remote control
Dimensions and Weight
- Dimensions (W x H x D):435 x 70 x 285 mm
- Weight: 4.85 kg
Downloads
Manufacturer information

C338
-
Fidelity Guide
Feel free to check out our Advice Blog. Here we discuss fundamentals and answer frequently asked questions from the Hi-Fi world.
-
FAQs
You can find questions and answers about products, availability, shipping, payment, and service in our FAQs.
-
Customer service
Our online customer service and sales team is available to assist you by phone or email.
shop@fidelity-hh.de
040 25776690 -
Fidelity Store
For personal and expert advice, visit our store. Here you can experience and compare products in 10 different listening studios across more than 800 m² of exhibition space.
Adlerstraße 79, Rellingen
Our exhibition
Arrange an appointment
Frequently asked questions about our products
Please visit our FAQ page to learn more.
Are all displayed products immediately available?
All visible products are generally either in stock with us or can be ordered from our suppliers. You can find the current availability or delivery time on the respective product page. If you have any questions about availability, please feel free to contact us at any time.
Do you offer pre-purchase advice?
Yes. If you are still unsure about your choice or if our online shop does not cover all the information you need, we would be happy to advise you in person. We are committed to finding a long-term and suitable solution for your requirements. Please contact us in person to benefit from our experience.
How do I find the right accessories for my setup?
The added value that the right accessories can bring is often underestimated. To help you get the most out of your setup, we are happy to advise you personally.
Is there a warranty on all products?
Our products come with their own manufacturer's warranty, the duration and terms of which may vary depending on the brand and product. We handle warranty claims for products purchased from us on your behalf.

