Description
The NAD C 558 is a belt-driven turntable for price-conscious vinyl fans. Its
solid, matte black chassis made of high-density MDF is effectively decoupled
from the surface by four rubber feet. The 10 millimeter thick platter is made
of glass, and the felt mat to be placed on it is included in the scope of
delivery. Power is supplied by a precision AC motor, which is provided with the
required operating voltage by a separate switched-mode power supply. The
turntable comes pre-assembled with a 9" tonearm TURNTABLE C 558
HIGH-QUALITY
MATERIALS
The C 558's low-resonance, precision-machined sub-platter is driven by the motor via a special flat rubber belt, with the platter resting on a hardened steel shaft, which in turn rests in a brass bearing. All parts of the C 558 have been carefully manufactured and selected to ensure maximum smooth running of the record.
Of course, every detail was carefully considered in the design and manufacture of the tonearm. With a length of 9", it combines maximum tracking stability with the highest possible rigidity and lowest mass. Furthermore, tracking force and azimuth can be adjusted manually for the most precise scanning possible, so that the record is played with as little distortion and wear as possible.
The solid chassis and the glass platter also protect against negative
influences such as vibrations and thus also contribute to extracting as much
music as possible from every record. The chassis is made of CNC milled MDF and
not, as is often the case in this price range, of particle board or plastic. The
dust cover is also made of low-resonance, heavy acrylic, with a special hinge
design allowing for virtually stepless opening of the cover.
MAIN FEATURES
• solid and resonance-free MDF chassis with rubber feet
• Belt drive with
speeds of 33 and 45 rpm.
• 10 mm thick glass platter with felt mat
•
Precision AC motor
• separate switched-mode power supply
• 9" tonearm
with integrated headshell
• Ortofon OM10 MM cartridge
• vertical tracking
angle and azimuth adjustment
• low-resonance dust cover
• high-quality RCA
cable with separate ground wire
Properties
GENERAL
Speeds
33 and 45 RPM, manual
speed change
Speed deviation
33 RPM:
± <0.50%, 45 RPM: ± <0.45%
Wow and flutter
33 RPM: ± <0.15%, 45 RPM: ±
<0.15%
Tracking force
0 – 30 mN, 0 – 3.0
g
TONEARM
Operation
Manual
Length
230 mm
Overhang
18 mm
Effective tonearm mass
9.5 g
Cable capacitance
150-400 pF
CARTRIDGE
Frequency response
20 – 22,000 Hz
Output voltage
4 mV
Recommended tracking force
15 mN
Weight
5 g
Stylus type
20 µm/mN – elliptical
DIMENSIONS AND WEIGHT
Dimensions (W x H x D)
435 x 340 x 125 mm
Weight
5.5 kg (turntable) – 1.74 kg
(platter)
Carton weight
8 kg
Manufacturer information
C558
The NAD C 558 is a belt-driven turntable for price-conscious vinyl fans. Its solid, matte black chassis made of high-density MDF is effectively decoupled from the surface by four rubber feet. The 10 mm thick platter is made of glass, and the felt mat to be placed on it is included in the scope of delivery. A precision AC motor provides the drive, powered by a separate switched-mode power supply. The turntable is equipped ex-works with a 9" tonearm, a pre-mounted Ortofon OM10 moving magnet cartridge, a high-quality RCA cable with a separate ground wire and gold-plated connectors, and a low-resonance dust cover.
AVAILABILITY
Immediately available: Available in our warehouse
Available: Available in our supplier's warehouse*
* We ship either from our warehouse or from our supplier's warehouse, whereby the goods can be sent either to us as an intermediate storage or directly to the customer. Our supplier is the manufacturer or distributor of the goods.
DELIVERY TIME
Shipping takes place within the delivery time stated in the online shop.
DELIVERY PERIODS
Prepayment: The delivery period begins one day after receipt of payment
All other payment methods: The delivery period begins one day after conclusion of the contract
DELIVERY DELAYS
Delivery delays may originate from our suppliers and will be announced by us. If major delivery delays occur, we offer a partial delivery, a replacement, or a refund upon individual arrangement.
Check shipping costs
GERMANY & AUSTRIA
Free shipping on orders over €99
Below that: €4.99 shipping costs
Excluded from this are our TVs, which are shipped with a freight forwarding flat rate of €39. The order value is irrelevant.
EUROPE
€49.99 shipping costs
List of countries:
Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden
OUTSIDE EUROPE
Shipping outside Europe requires individual and personal agreement with our logistics team.
Pickup available
Simply pick up your order at the store
Extended Warranty
More protection thanks to an extended warranty
Cheaper elsewhere?
Ask us for a discount
Description
The NAD C 558 is a belt-driven turntable for price-conscious vinyl fans. Its
solid, matte black chassis made of high-density MDF is effectively decoupled
from the surface by four rubber feet. The 10 millimeter thick platter is made
of glass, and the felt mat to be placed on it is included in the scope of
delivery. Power is supplied by a precision AC motor, which is provided with the
required operating voltage by a separate switched-mode power supply. The
turntable comes pre-assembled with a 9" tonearm TURNTABLE C 558
HIGH-QUALITY
MATERIALS
The C 558's low-resonance, precision-machined sub-platter is driven by the motor via a special flat rubber belt, with the platter resting on a hardened steel shaft, which in turn rests in a brass bearing. All parts of the C 558 have been carefully manufactured and selected to ensure maximum smooth running of the record.
Of course, every detail was carefully considered in the design and manufacture of the tonearm. With a length of 9", it combines maximum tracking stability with the highest possible rigidity and lowest mass. Furthermore, tracking force and azimuth can be adjusted manually for the most precise scanning possible, so that the record is played with as little distortion and wear as possible.
The solid chassis and the glass platter also protect against negative
influences such as vibrations and thus also contribute to extracting as much
music as possible from every record. The chassis is made of CNC milled MDF and
not, as is often the case in this price range, of particle board or plastic. The
dust cover is also made of low-resonance, heavy acrylic, with a special hinge
design allowing for virtually stepless opening of the cover.
MAIN FEATURES
• solid and resonance-free MDF chassis with rubber feet
• Belt drive with
speeds of 33 and 45 rpm.
• 10 mm thick glass platter with felt mat
•
Precision AC motor
• separate switched-mode power supply
• 9" tonearm
with integrated headshell
• Ortofon OM10 MM cartridge
• vertical tracking
angle and azimuth adjustment
• low-resonance dust cover
• high-quality RCA
cable with separate ground wire
Properties
GENERAL
Speeds
33 and 45 RPM, manual
speed change
Speed deviation
33 RPM:
± <0.50%, 45 RPM: ± <0.45%
Wow and flutter
33 RPM: ± <0.15%, 45 RPM: ±
<0.15%
Tracking force
0 – 30 mN, 0 – 3.0
g
TONEARM
Operation
Manual
Length
230 mm
Overhang
18 mm
Effective tonearm mass
9.5 g
Cable capacitance
150-400 pF
CARTRIDGE
Frequency response
20 – 22,000 Hz
Output voltage
4 mV
Recommended tracking force
15 mN
Weight
5 g
Stylus type
20 µm/mN – elliptical
DIMENSIONS AND WEIGHT
Dimensions (W x H x D)
435 x 340 x 125 mm
Weight
5.5 kg (turntable) – 1.74 kg
(platter)
Carton weight
8 kg
Manufacturer information
C558
-
Fidelity Guide
Feel free to check out our Advice Blog. Here we discuss fundamentals and answer frequently asked questions from the Hi-Fi world.
-
FAQs
You can find questions and answers about products, availability, shipping, payment, and service in our FAQs.
-
Customer service
Our online customer service and sales team is available to assist you by phone or email.
shop@fidelity-hh.de
040 25776690 -
Fidelity Store
For personal and expert advice, visit our store. Here you can experience and compare products in 10 different listening studios across more than 800 m² of exhibition space.
Adlerstraße 79, Rellingen
Our exhibition
Arrange an appointment
Frequently asked questions about our products
Please visit our FAQ page to learn more.
Are all displayed products immediately available?
All visible products are generally either in stock with us or can be ordered from our suppliers. You can find the current availability or delivery time on the respective product page. If you have any questions about availability, please feel free to contact us at any time.
Do you offer pre-purchase advice?
Yes. If you are still unsure about your choice or if our online shop does not cover all the information you need, we would be happy to advise you in person. We are committed to finding a long-term and suitable solution for your requirements. Please contact us in person to benefit from our experience.
How do I find the right accessories for my setup?
The added value that the right accessories can bring is often underestimated. To help you get the most out of your setup, we are happy to advise you personally.
Is there a warranty on all products?
Our products come with their own manufacturer's warranty, the duration and terms of which may vary depending on the brand and product. We handle warranty claims for products purchased from us on your behalf.